Hayabusa Owners Group

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Chain Replacement

Big Red

Donating Member
Registered
Joined
Apr 2, 2005
Messages
2,153
I am going to be replacing the factory o-ring chain soon and was wondering if it should be replaced with another o-ring chain or a non o-ring chain. I always clean and lube the chain around 400 miles regardless. The chain will be replaced before the Spring Bash. I will be riding from Texas to North Carolina. What say you my fellow Busa Brethren.
 
I would not even consider a non o-ring chain...

I got the EK ZZZ 530
 
o-ring
beerchug.gif
 
The O-rings help hold in lubrication to the pivoting roller. O-ring for sure!
beerchug.gif
 
i have a non o ring chain that i use but had a 530zzz before with no problems
 
go with the o-ring chain for everyday street riding but on the track a non o-ring chain creates less drag and is better for the strip.
beerchug.gif
 
Has anyone done a test at the track to see how much of a difference there is between a non o-ring versus o-ring? I know it owuld be a pain in the behind but people might still like to know the out come.
 
my dad's bike picked up a tenth in the 1/4 mile with the change from o-ring to non o-ring.
lurk.gif
 
Thanks for the input guys; an EK ZZ 530 O-ring chain it will be.
 
Order the zvx2 and you will never look back.I have sold zzz to guys and they have taken them off and replaced them with zvx2's and been good every since..
 
Top Bottom