Brembo RCS clutch MC problems

[turbobusa2000]

I just installed my Brembo RCS clutch MC and I'm having a little trouble with the clutch not disengaging when I pull in the lever. I also installed a new SS line. Problem is when Im down shifting or upshifting it doesn't go in and out smoothly. The lines are bled completely.

Normally I could go through the gears while at a stand still but it simply won't move, sometimes not at all, very clunky. Other things to note, I have HD clutch springs and a billet sprocket cover.

If someone has installed one of these that had a similar problem let me know or if you have any idea what could cause this. Thanks.

 

[GixxerFixxer]

Should work perfectly unless it's not bled correctly... try adjusting the pivot distance on the MC and see if it makes a difference

 

[GIXERHP]

You do have it set on the 14 setting correct?

 

[timoram]

Hi there
Let me shine some light on this subject.

The Hayabusa have a bigger clutch compared to the standard bikes and needs a bigger M/C, the new 19RCS clutch 110.A263.70
The person that sold you this product should know this , that is why Brembo has developed the 19RCS for this specific reason for Hayabusa GSXR 1300, ZX12R, ZX14R and some Ducati's.
Optimum Performance Products Inc. (OPP Racing) - Performance Motorcycle Parts Distributor
Brembo 19RCS Forged Clutch Master Cylinder with Folding Standard Lever (for 1 inch bar) - [part nP110A89770] - OPPRACING Products

Nothing wrong with your bleeding, nothing wrong with the 16RCS you just have the wrong part.

tim

 

[turbobusa2000]

You do have it set on the 14 setting correct?

Do you have the larger clutch mc or the 16/14?

 

[turbobusa2000]

Hi there
Let me shine some light on this subject.

The Hayabusa have a bigger clutch compared to the standard bikes and needs a bigger M/C, the new 19RCS clutch 110.A263.70
The person that sold you this product should know this , that is why Brembo has developed the 19RCS for this specific reason for Hayabusa GSXR 1300, ZX12R, ZX14R and some Ducati's.
Optimum Performance Products Inc. (OPP Racing) - Performance Motorcycle Parts Distributor
Brembo 19RCS Forged Clutch Master Cylinder with Folding Standard Lever (for 1 inch bar) - [part nP110A89770] - OPPRACING Products

Nothing wrong with your bleeding, nothing wrong with the 16RCS you just have the wrong part.

tim

Good info I'll have to look into this.

 

[GIXERHP]

I have the 14 by 16, and it works fine!

 

[turbobusa2000]

I have the 14 by 16, and it works fine!

Hmm, strange. Well I was in contact with the nationanl distibutor or Brembo parts and he is going to get me straigtened out. Thanks for the help fellas!

 

[turbobusa2000]

I have the 14 by 16, and it works fine!

My master is the 16 RCS with variable 16 and 18 settings. Is that what you have?

I had no idea there was a larger MC available. Would have been nice to know. Hopefully I can get a replacement without to much hassle. This one isn't working for me at all.