Brocks Camshafts

[pcs]

back to the top, i mean under the ”knife”

 

[Fernando]

back to the top, i mean under the ”knife”

View attachment 1678461

you got it brother, you
almost done.

 

[pcs]

with yoshi at least you get the specs up front

 

[Robert 0046]

with yoshi at least you get the specs up front

View attachment 1678615

@pcs how much cost those cams?

 

[Robert 0046]

If any one has the video comparison between the Brocks and the Gen2 cams please feel free to share thank you all.

 

[Fernando]

@pcs how much cost those cams?

SUZUKI HAYABUSA 2008-12 Camshafts ST-1

Intake : Lift 9.5mm / Duration 249.0 degrees Exhaust : Lift 8.7mm / Duration 235.0 degrees Standard Tappet Clearance(mm) : IN 0.20mm / EX 0.20 mm Recommended Parts: Valve Cotter Set (#222-509-3000) All cams are ground by Yoshimura Japan using truly state-of-the-art equipment Cams are machined...

www.yoshimura-rd.com

 

[Fernando]

$924.00 Remember these are Gen 2 cams and cam sensor fits well on Gen 3 engines

 

[pcs]

If any one has the video comparison between the Brocks and the Gen2 cams please feel free to share thank you all.

no need go compare them when they are the same camshafts. waste of money to over pay for “super stock cams” (imo) when you can buy them cheaper from the dealer. if money is tight, used gen 2 cams can be used.

 

[ROADTOAD1340]

@pcs how much cost those cams?

Yoshi cams with slotted spockets Stage 2 and Stage 1 , for Gen 2 08 - 12

YOSHIMURA : Camshaft [ST-1] [211-509-0100]

Product Description: YOSHIMURA Camshaft [ST-1] [211-509-0100] : Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-12Descripti... - Webike

japan.webike.net

YOSHIMURA : Camshaft [ST-2] [211-509-0200]

Product Description: YOSHIMURA Camshaft [ST-2] [211-509-0200] : Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-12Descripti... - Webike

japan.webike.net

The valve cotter set is separate listing

YOSHIMURA : Valve Cotter Set [222-509-3000]

Product Description: YOSHIMURA Valve Cotter Set [222-509-3000] : Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 99-12Descripti... - Webike

japan.webike.net

Best price Worldwide I think...

 

[Fernando]

Yoshi cams with slotted spockets Stage 2 and Stage 1 , for Gen 2 08 - 12

YOSHIMURA : Camshaft [ST-1] [211-509-0100]

Product Description: YOSHIMURA Camshaft [ST-1] [211-509-0100] : Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-12Descripti... - Webike

japan.webike.net

YOSHIMURA : Camshaft [ST-2] [211-509-0200]

Product Description: YOSHIMURA Camshaft [ST-2] [211-509-0200] : Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-12Descripti... - Webike

japan.webike.net

The valve cotter set is separate listing

YOSHIMURA : Valve Cotter Set [222-509-3000]

Product Description: YOSHIMURA Valve Cotter Set [222-509-3000] : Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 99-12Descripti... - Webike

japan.webike.net

Best price Worldwide I think...

Thank you for the info @ROADTOAD1340

 

[sixpack577]

Yoshi cams with slotted spockets Stage 2 and Stage 1 , for Gen 2 08 - 12

YOSHIMURA : Camshaft [ST-1] [211-509-0100]

Product Description: YOSHIMURA Camshaft [ST-1] [211-509-0100] : Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-12Descripti... - Webike

japan.webike.net

YOSHIMURA : Camshaft [ST-2] [211-509-0200]

Product Description: YOSHIMURA Camshaft [ST-2] [211-509-0200] : Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 08-12Descripti... - Webike

japan.webike.net

The valve cotter set is separate listing

YOSHIMURA : Valve Cotter Set [222-509-3000]

Product Description: YOSHIMURA Valve Cotter Set [222-509-3000] : Fits:SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA) 99-12Descripti... - Webike

japan.webike.net

Best price Worldwide I think...

...and a couple hundred cheaper than Brock's rebranded stock Gen2 cams
lmao

 

[Fernando]

Who doesn't believe that the cam swap doesn't work? be honest

 

[Tony Nitrous]

Who doesn't believe that the cam swap doesn't work? be honest

I 100% believe it works.

Tall stacks, ECU mapping, triple cats etc along with the cams are all part of giving the Gen-3 a Euro-5 certification and more strong low down power. If you are chasing horsepower and not tied by emissions and type approval there’s no reason to believe the Gen-2 (that couldn’t even meet Euro-4) cams might spice it up.

 

[Bumblebee]

I 100% believe it works.

Tall stacks, ECU mapping, triple cats etc along with the cams are all part of giving the Gen-3 a Euro-5 certification and more strong low down power. If you are chasing horsepower and not tied by emissions and type approval there’s no reason to believe the Gen-2 (that couldn’t even meet Euro-4) cams might spice it up.

I agree, the cams are one of the issues the bike has more mid range and less top end....

That was one of the things I did to my Bandit in the day, I put a set of GSXR cams in it which made a big difference.

I also put a set of Yosh cams in my GSXR in the day and that made a big difference as well...

 

[Tony Nitrous]

I agree, the cams are one of the issues the bike has more mid range and less top end....

That was one of the things I did to my Bandit in the day, I put a set of GSXR cams in it which made a big difference.

I also put a set of Yosh cams in my GSXR in the day and that made a big difference as well...

Interestingly, I think Yoshi aftermarket Gen-2 cams are cheaper than Brocks repackaged Gen-2 cams.

 

[Bumblebee]

Interestingly, I think Yoshi aftermarket Gen-2 cams are cheaper than Brocks repackaged Gen-2 cams.

.....isn't that a kicker.....

I'm a big fan of anything Yoshimura........

 

[Fernando]

I believe 100%. here is the results on my bike. Using Gen 2 cams.

 

[Bumblebee]

I believe 100%. here is the results on my bike. Using Gen 2 cams.

View attachment 1679015

Very good number for sure.....

 

[pcs]

@Fernando those “super stock” cams worked great for you

 

[Fernando]

Very good number for sure.....

Amazing power without affecting drivability. I love my bike