ECU Reprogramming? NLR & RCC
- Thread starter GMANSYZ
- Start date
there are lot sof people doing the ecu programming. On smitha's site I think he even lists locations of tunning shops that use the ecu hack software.
To get to nlr's web site just go to google and type in "nlr racing" and it'll pop right up.
To get to RCC's site go to google and type in "rcc turbo" and it'll pop right up.
To get to nlr's web site just go to google and type in "nlr racing" and it'll pop right up.
To get to RCC's site go to google and type in "rcc turbo" and it'll pop right up.
mps does them..
Thanks for the help. I got the two pages saved but how do I find Smitha's?
I have an '07 GSXR1000 that I want to turbo and see if the stock box can be reprogramed along with an '03 GSXR1000 box that needs the same as I am trying to graft it to an old GS to be turbo's. Any help there?
Thanks
G
I have an '07 GSXR1000 that I want to turbo and see if the stock box can be reprogramed along with an '03 GSXR1000 box that needs the same as I am trying to graft it to an old GS to be turbo's. Any help there?
Thanks
G
greg's site is boostbysmith 
rhight1340
Registered
If your serious about doing a reflash on a Busa, Greg at BoostbySmith has what you need. There is alot of good info on the board on how to set up Greg's equipment. Walter Sprout does the tuning for the reflash using ECU Editor and he has all my chips in for the win. Long story short cost effective reflashing gets an A+, Options for settings another A+, reflashing on the Dyno takes a little more time than the PCIII equipment but it works great. I like using the equipmnet I have and getting the most out of it. Talk to Greg over at "BoostbySmith" he has what you need
rhight1340
Registered
