Probably not. But I changed it. We will find out soon enough what real problems it has
Gen 1 grudge bike build.
- Thread starter Bigboy Busa2
- Start date
Worked on front shocks. We're cut down too much. I replaced the spacer. And cut down another. Its not professional but I dont feel its dangerous. When I get my combination right I will send off to m2 shocks. I have been too impressed with the work from them. And these are 1000 shocks. Not sure if I will keep them or not
Motor is back in. And swingarm. Shock was rebuilt from jri last week. Putting harness on this week. After the chain came off I cant find master link. Going to order a new one tomorrow.
Oil pan on as you see and soon to put the new clutch cover on
Pretty cool
I was blessed enough to get a good deal on one of these. Finally. Makes me smile to see that.
Money well spent? And you know what it takes to get those lower bolts out on the sidewinders.
busakiller
Registered
What side winder is that?
Both are murray.
I like the voodoo competition. But the outlet is only 2 1/2 inches. Seems a little small. But I'm no expert.
You can see where it is stepped. The other one is not. I bought that used online. And learned a lesson. Not happy with it. But the muffle has murray tag. Maybe its a knockoff. It has been welded so no springs. A big lesson learned
busakiller
Registered
Weird I have a Murray side winder on my bike and I don’t have a problem changing oil filters. I have just enough clearance to swap them out.
Dont know if its old new or knockoff. This one I think maybe a pieces from different puzzle
This one was cut for prostreet pegs. But suppost to be murray. I am exhausted out. No more used for me. I have been used.
Cut so your feet can touch the ground with heels on pro street pegs.
Thanks for the info. Learning stuff everyday. So much easier talking to people.
Slave cylinder rebuild. The billet cover saved the water pump. You can see the damage
Was having a hard time getting the chain bump. So I make this out 3/4 pex. Works great
Thanks. Going to get to this soon. That going to take a minute. Fuel cell. Nitrous. And wiring. Going to wait on the dyna ignition with 2 step amd methanol till I get the motor this winter. But have Greg Smith nitrous. Editor. Kill switch. And air shifter. Going to co2 with this one.
Similar threads
