gen 3 turbo busa

[liass44]

Damn I hope u got the bike out asap

I did get it out the next day but it took 5 hours as I had to call the police because the impound wouldn't release the bike because they said the VIN came back as stolen... Cops came and still count figure out why the vin came back to a stolen suzuki quadrunner?? Anyways, apparently there is a stolen vin issue with 22 suzukis so watch out.. They gave me my bike but I have to go to the DMV to sort this out.

 

[BigBSBusa]

I did get it out the next day but it took 5 hours as I had to call the police because the impound wouldn't release the bike because they said the VIN came back as stolen... Cops came and still count figure out why the vin came back to a stolen suzuki quadrunner?? Anyways, apparently there is a stolen vin issue with 22 suzukis so watch out.. They gave me my bike but I have to go to the DMV to sort this out.

I hate things like this that just waste time.

 

[sixpack577]

Yay...another Gen3 issue

 

[Dnyce]

There were some 1st gens that have the vin pop up as gsx1250

 

[sixpack577]

There were some 1st gens that have the vin pop up as gsx1250

but a deal on insurance!
lol

 

[liass44]

Took a shot at the local 1/8 mile track here, known for being the craziest track in the US.. Slept at the light a little bust still managed 5.6 @ 140 and took the win

 

[sixpack577]

Took a shot at the local 1/8 mile track here, known for being the craziest track in the US.. Slept at the light a little bust still managed 5.6 @ 140 and took the win

Cool, and that bike will get into the 4's!

 

[liass44]

Cool, and that bike will get into the 4's!

I'm at 64" WB right now. Going to move axle back to 68", air shifter, set my slider clutch up (mtc gen 2, center delay springs are out of it now so it's a hand clutch) and then I'm hoping I get in the 4's

 

[Bluesun]

60-130 times and 100-150 times.. Around 20 psi

Still gotta work on getting my 60-130 times lower

View attachment 1688935

View attachment 1688936

what swing arm / suspension setup are you running? on my 3rd gen @ 15psi I can't keep the front wheel down in really any gear except 5th/6th on stock swing arm / ride height. The best 100-150 I've done is 2.6, and that's cookin'

EDIT: posted before I saw your last post. 64" is more than stock I'm assuming

 

[liass44]

what swing arm / suspension setup are you running? on my 3rd gen @ 15psi I can't keep the front wheel down in really any gear except 5th/6th on stock swing arm / ride height. The best 100-150 I've done is 2.6, and that's cookin'

EDIT: posted before I saw your last post. 64" is more than stock I'm assuming

DME 6-10. Been a 6 over (64" wheelbase) just brought it to 8 over for drag. I'm lowered an inch or so in the front + strapped. M2 S3 Rear shock. Using anti-lag

 

[liass44]

Update -

Found piece of the Copper Shim that sits under the valve spring in oil. Bike was still running perfect. Pulling engine and fixing. 4400 Miles on build.

 

[sixpack577]

Update -

Found piece of the Copper Shim that sits under the valve spring in oil. Bike was still running perfect. Pulling engine and fixing. 4400 Miles on build.

How big of a piece?
Stock or aftermarket springs?

 

[liass44]

How big of a piece?
Stock or aftermarket springs?

APE springs
small
maybe 1/2"

 

[Dnyce]

that piece is huge, too big to get stuck anywhere except the trans. That would’ve been bad lol-atleast it didn’t drop a valve

 

[liass44]

that piece is huge, too big to get stuck anywhere except the trans. That would’ve been bad lol-atleast it didn’t drop a valve

I actually ran the bike at the strip after I found it lol. She held together. It's apart now