hayabusa gen 1 GPI

[BusaBoy96]

Hi everyone, I've already read these 4 posts before writing:

Thread 'Hayabusa Gear Position Indicator *Behind Tach*'

May 31, 2014

Hello All

I will start off by saying that I was not the first person to do this.
Tomohawk (typo?) was the first that I know of.

I'm developing a GPI kit that can be integrated into the existing cluster of the hayabusa.
LED's would be positioned behind the 1-6 of the tach and light up according to which gear your in.
I'm developing this mod as a kit that you can take and install yourself.
I'll be starting with just the Gen 1 Hayabusa as that is what I ride and working to expand it to other bikes.

Just wanted to give everyone here a heads up as I know this can be a difficult mod to have...

• EchoBase
• Replies: 55
• Forum: Busa Mods

• 

Thread 'Hayabusa Gen I Fairings With Gen Ii Interchangeable'

Apr 22, 2017

Forum :

Good afternoon just wondering what it will in-tail to do this interchange?

Hayabusa Gen I fairings with Gen II.

• Ezz1r
• Replies: 5
• Forum: Busa Mods

Thread 'How I added a GPI behind the tech.'

Jan 20, 2015

I hope this is OK - I Did post this under the Winter/Spring projects thread I stated.
I decided to add it here ON the Gen I Board as it basically is for Gen I owners only
And SOME people are lucky enough to be able to ride all year so may never look at the Winter/Spring thread
But still might be interested in this Mod.

OK I have added a Gear Position Indicator behind the tachometer and this is how I did it.
I know there were some people that were afraid to open up the speedometer thinking they might do damage to it.
I do not consider myself to be an electronic whiz by any...

• RedBusarider
• Replies: 20
• Forum: General Bike Related Topics

• 
• 
• 

2005 Hayabusa K4/K54 (GPI) Gear position indicator wire location and signal decoding | General Bike Related Topics

but unfortunately I didn't find anything that explained exactly what needed to be done.
so I would like to ask those who have already done it, where to connect the 6 LEDs behind the speedometer!?!
but above all how did you connect the rectangular cable under the tank (gear sensor) to the speedometer with the 6 LEDs??

I await your news, thanks to all

 

[BusaBoy96]

I found this gear sensor diagram... and it's already a step

and then I found this scheme, but it doesn't work exactly as I would like

come on guys don't leave me now