I think transmissions hate me.

[busafan08]

I run a 19 tooth on the front and use 6 gear all the time 3500rpm at 100kph love it agree that its a bit of a pain sometimes to shift from 5 to 6 on this bike I have the Chinese lowered adjustable footpegs same as what C10 has which helps adjust my foot right under the shift lever this and shifting with authority from 5 to 6 helps

 

[Tached1300]

I ride in 6th all the time and rarely have any problems.

Is your bike running stock ratio sprockets ?

 

[Bumblebee]

Is your bike running stock ratio sprockets ?

Yep. I will run in lower gears depending on what I'm doing much like what c10 said in his last video but when I am cruising around, I pop up to 6th to keep the revs low.

 

[Tached1300]

Yep. I will run in lower gears depending on what I'm doing much like what c10 said in his last video but when I am cruising around, I pop up to 6th to keep the revs low.

I’m on stock sprockets/ratio

 

[mabupa]

Thanks for the video Bryan! Very informative, as usual!

 

[BUMWOP]

I'm having a similar issue with my Gen 2. I'm getting a false neutral light, but I'm getting them in the lower gears. When I select 1st, it slams as I let the clutch out and get to about 3K RPMs, it starts to hiccup and even shuts the bike down. I haven't attempted to go higher than 2nd as I'm afraid to do any severe damage if it is not already done. The kickstand sensor is bypassed, but the wire seems to be okay.