ID this part , win $20

ItsDooomz

Registered
$20 via PayPal to the first person that can tell me where these things go. They're rubber bushings or grommets. I'm thinking they go somewhere around the air box or gas tank. Can't remember where they came from. Thanks in advance and good luck.

1599688
 
they are the pieces to hold the fairings in place.Those are stuck in the metal holes - The push rods(if thats the right word...)-go in these rubber holes!

The top push rod on the side fairings to be exact.

Edit: or the lower ones as seen in the above pic.
 
Great, we're on to something. I have all four of my lower fairings grommets in place. So where else on the bike do these things exist? Upper fairing maybe?
 
^^^^^^^^^^^^^^^^^
That is right for the ram air tubes , and on the frame above the clutch and on the frame above the sprocket cover , last 2 grommets that the lower section of fairing mates up to . Best idea is to Vaseline them for easier slide in of bodywork plug .
I know it has already been answered , by c10 at least , and others , but just backing them up !!
 
I buy those in sets of 4 at a time, because my original ones are starting to break down. Wherever the fairing has a “pin”, one of those grommets needs to be in the frame hole or any bracket, so it’ll hold the fairing.
 
C10 was 1st to post the correct answer. Sorry to those that had the correct part but in the wrong spot. You guys and gals get the consolation prize. A big thumbs up :thumbsup:

C10, send me your PayPal address, your prize is waiting...

Thanks for all the help, this was a lot of fun.

1599700
 
Way to go Bryan (c10) some new bit of Ti will be purchased I'll bet...

Heck, I was even browsing the Ti hardware on Amazon the other day...thankfully I was able to walk away before going crazy...and buying it all.
 
Back
Top