OB_busagsx1300r
Registered
MOTORHEAD, WHAT ARE U USING FOR A FILTER? R U PUTTING IT AT ON TOP OF THE HOLE YOU CUT IN THE BOX OR UP AND DOWN BY THE VELOSITY STACKS? THANKS FOR YOUR HELP.
OB_THE MOTORHEAD
Registered
a unifilter that covers hole thats about a 9"x12'x8"trapazoid i offer 2 types right nowhigh flow and super duty extra dense.you must oil once every couple thousand miles for maximum protection
OB_GSXRTURBO1
Registered
Mr Nice Guy, for a turbo to blow the spark out on a Hayabusa ignition would require more boost than the combo could safely handle. The point I was trying to make was that the less than 1 psi boost a ram-air system makes is nothing compared to the turbulence AND velocity of a turbo (albeit at a reasonable 20 psi or so).
OB_busagsx1300r
Registered
MOTORHEAD, WHAT R U CHARGING FOR THE FILTER?
HIGHFLOW ONE
HIGHFLOW ONE
OB_DangerMouse
Registered
I'd be interested in a MH box and am in the UK too, maybe you could do all thre in one whack and save on the shipping?
Or ship via Charles at CycleStuff he
s very efficient!
Or ship via Charles at CycleStuff he
s very efficient!
OB_VegasDude
Registered
ran the zx12 without airbox mod, (airbox is in the mail)..........ran a 4th gear roll on, my strongest gear..........I killed the 12. Then I ran a 2nd gear roll on I pulled 1\4 length ahead, hit third and blew his fairings off............did a final 6th gear roll on...........same story. The 12 had about 560 miles on it. It probably isnt broke in all the way yet........but it wont make any difference once it is.............
[This message has been edited by VegasDude (edited 27 May 2000).]
[This message has been edited by VegasDude (edited 27 May 2000).]
OB_VegasDude
Registered
Hey omega, email me your phone number, I need to talk to you..........davea@lvcm.com
OB_THE MOTORHEAD
Registered
see(themotorhead.com) mod section under order list only if you need a loaner otherwise you can send to the posted address on my site and i'll get it done pronto.you'll be glad you did!!!!for now all uk and overseas will be no core modded boxes with extra stacks and clamps.290$ usd plus shipping
[This message has been edited by THE MOTORHEAD (edited 27 May 2000).]
[This message has been edited by THE MOTORHEAD (edited 27 May 2000).]
So disrespect intended here, but you guys can do what MH is doing very easy. Why not try before ordering/waiting?
Did mine the night before last, went to the dyno today and here is what I got:
Increased 2.1 ft/# and .3 hp over what I had at peak, good news? Yes because at 6500 rpm I got 5 ft/# and 5 hp over my "small mod" airbox. I got more (2-5 ft/#) all the way from 1500 rpm to 6500 rpm.
Yes I am happy, and wish to thank MH for his time and dyno runs. Buy guys, this mod is an easy thing to do.
Did mine the night before last, went to the dyno today and here is what I got:
Increased 2.1 ft/# and .3 hp over what I had at peak, good news? Yes because at 6500 rpm I got 5 ft/# and 5 hp over my "small mod" airbox. I got more (2-5 ft/#) all the way from 1500 rpm to 6500 rpm.
Yes I am happy, and wish to thank MH for his time and dyno runs. Buy guys, this mod is an easy thing to do.
OB_redliner
Registered
Motorhead, how are your filters held in place? How much do you sell the filters for?
G
Guest
Motorhead,
I am yet another in the UK that would like one of your airboxes!!...add me to the list please..
Thanks
mike
I am yet another in the UK that would like one of your airboxes!!...add me to the list please..
Thanks
mike
OB_redliner
Registered
How much for the air filter? I did the full box mod about 7 or 8 months ago. I need a better air filter than the modified stock zx9 filter that im using now. So what will you sell me a high flow filter for?
Similar threads
