My trials and tribulations.....

[bigdr]

Well done..

 

[camaroguy72]

i dont recall the manual calling for loctite on that nut... but rather on the speed sensor rotor bolt instead.? i took mine off with an impact gun and torqued it down to 105 ft lbs, and the rotor bolt got 13 ft lbs and some blue loctite

 

[runeight]

i dont recall the manual calling for loctite on that nut... but rather on the speed sensor rotor bolt instead.? i took mine off with an impact gun and torqued it down to 105 ft lbs, and the rotor bolt got 13 ft lbs and some blue loctite

If memory serves me correctly the nut does not but the bolt does.

Nice work. Took all day huh?

hogger...

 

[BigBSBusa]

Sometimes its the easy things that are the most difficult.

 

[steelhead]

Job well done.

 

[psycobusa]

i dont recall the manual calling for loctite on that nut... but rather on the speed sensor rotor bolt instead.? i took mine off with an impact gun and torqued it down to 105 ft lbs, and the rotor bolt got 13 ft lbs and some blue loctite

If memory serves me correctly the nut does not but the bolt does.

Nice work. Took all day huh?

hogger...

yeah it did take all day....take a fairing off, have a beer, watch the tube, take the coolant resevoir off, have a beer, watch the tube, take the sprocket cover off, have a beer, watch the tube, ect...ect...ect

 

[GMbusa]

I'm glad you got our nut off.

 

[omslaw]

I'm glad you got our nut off.

BWAHAHAHAHA!

 

[psycobusa]

I'm glad you got our nut off.

yeah, it was a huge relief when it finally popped

i was even a little sleepy after all the exertion