Has anyone ever heard of WRM? I noticed that the racing Busa at Road Atlanta last weekend, it had a rearset with WRM etched in it. I sure would like to find a supplier of rearsets, exhaust hangers, tripple clamps, etc.
While your on a wishlist I would love to know of a nice carbon front guard (not lockhartphillips) and a ride hight adjuster ... perhaps a linkage setup like the GSXR's or perhaps I'll have to go an Ohlins shock with rideheight built in.
I'm also interested in a triple clamp since you cannot drop the forks on the standard one let alone set the preload!!
AUSSIE...have asked the same question about ride height adjustment and was given the answer by another member.I was told to fit the links from a SV650 but i found these lifted the rear too much and caused the front to push very hard.On the original link arms (these are the links between the swinging arm and shocker/knuckle)the measurement between both bolt holes is 119mm on the SV650 they were 100mm (this is center of hole to center of hole).I made two sets of links out of steel plate(because titanium is expensive)one set measured 110mm and the other set measured 115mm .The 110mm i will use on the track as the bike turns in lovely but it is hard on the front .The 115mm were brilliant on the road and try as i might i could not get the fairing to hit the road.
Schnitz Motorsports @ 800.837.9730 sells adjustable gear linkages/dogbones for our bike. I bought a set earlier in summer. Provides 3 settings from stock to low-rider low. Featherweight. 64 bucks I believe it was, to your door.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
