second set of injectors

[202mphbusa]

F. Me. I ordered the wrong fittings with my filters. Why why can’t they have the option to include them I accidentally ordered -8ORB. Instead of the -10 ORB

 

[202mphbusa]

Have I said F me I hate fittings

Return from the Fuel Rails to the regulator DONE
all AeroQuip AQP with Fuel injection Clamps -6 AN fittings

Filters are gonna be snug

 

[TonyM995]

Yeah it seems hard to get things right the first time. Did you buy the special wrenches for those fittings? My friend bought a kit of them so I’ll have to see if I can borrow them when the time comes.

 

[202mphbusa]

I did not buy the spcial tools for those
I have a Koul Tool for -8AN

these I clamp vise grips NOT TOUCHING around the head, so I can stand the hose up straight over the open vise
then I stand on a box and do a hand stand on the hose my weight and steady pressure gets them to bottom

 

[202mphbusa]

Spent the weekend un pinning then repinning my Primary injectors
only to undo it Sunday
then pinned 1-4 secondaries to match

One hose from FINISHING the fuel system
I made half the tank to pre filter 1/2 aluminum now I need a -8 elbow some hose and a couple fittings to connect to the hard line

 

[202mphbusa]

Two rides with the secondaries and gate spring level 3psi is there. Now boost controller gets turned on in baby steps

 

[202mphbusa]

A couple of trips "to Mexico" for tuning runs
3 PSI spring and 10 on the AMS1000
first run was 10.0-1 A/F Tuner Studio suggested changed , second run 11.3-1 Still a touch rich but pulled cleaner

STUPID GoPro video downloaded and then my PC told me something about outdated codec can't view
so now I gotta figure that out

 

[smithabusa]

A couple of trips "to Mexico" for tuning runs
3 PSI spring and 10 on the AMS1000
first run was 10.0-1 A/F Tuner Studio suggested changed , second run 11.3-1 Still a touch rich but pulled cleaner

STUPID GoPro video downloaded and then my PC told me something about outdated codec can't view
so now I gotta figure that out

Does it have closed loop fuel control as an option?

 

[202mphbusa]

Does it have closed loop fuel control as an option?

Sure does BUT I am not ready to trust it yet
altho I can control total percentage of allowable fuel change

 

[greg3852]

A couple of trips "to Mexico" for tuning runs
3 PSI spring and 10 on the AMS1000
first run was 10.0-1 A/F Tuner Studio suggested changed , second run 11.3-1 Still a touch rich but pulled cleaner

STUPID GoPro video downloaded and then my PC told me something about outdated codec can't view
so now I gotta figure that out

You have to use your phone now to do all the go pro poop.

 

[202mphbusa]

You have to use your phone now to do all the go pro poop.

I bought the gopro cause I thought I could overlay GPS
I can but it is a PIA

 

[greg3852]

You can overlay it. Just has to be done on the phone. It’s actually easy. Only one I know that doesn’t have gps is GoPro 11 mini. Like the one I bought. Motherbsbsvbshbsbsbs

 

[202mphbusa]

You can overlay it. Just has to be done on the phone. It’s actually easy. Only one I know that doesn’t have gps is GoPro 11 mini. Like the one I bought. Motherbsbsvbshbsbsbs

Hy gopro can and has done it. I have to turn it on and wait for it to find GPS
then I have to run the file thru a utility
then rename the original file something else
copy and rename the modded file into the gopro directory
THEN
let GoPro Quick find the files

ANY other order it fails
last time I think I imported before modding the file

 

[greg3852]

Is it a GoPro 2 or something? My hero 8 black works fine on my iPhone.

 

[202mphbusa]

Hero 7 or 8 I forget

 

[greg3852]

Hero 7 or 8 I forget

I want that main line on the other side. It sits dead center facing the engine so it’s too easy to kink.

 

[greg3852]

So would the block off plate remove all that? What about the wires?

 

[202mphbusa]

That is the feed line?
I bet it is collapsing or kinking
The return should have a tube inside to extend the line inside
The Pic I PM'ed you is for a race setup where you lose the gauge

Does anyone make one like this that keeps the gauge? or at least extends the return

But Greg I think it is your feed line

 

[greg3852]

That is the feed line?
I bet it is collapsing or kinking
The return should have a tube inside to extend the line inside
The Pic I PM'ed you is for a race setup where you lose the gauge

Does anyone make one like this that keeps the gauge? or at least extends the return

But Greg I think it is your feed line
View attachment 1667408

So I’m buying this and going to do the mod another guy did with nylon bolts and keep my fuel gauge. Of just buy a new bottom of the pump and start over.

 

[202mphbusa]

So I’m buying this and going to do the mod another guy did with nylon bolts and keep my fuel gauge. Of just buy a new bottom of the pump and start over.

I would start by replacing that hunk of outlet line with something less kinkable and see if problem is fixed