Unlimiting the busa AGAIN :)

[nergal]

Hi,

Im Nergal From Portugal, new here, and i know that this is a question that had been talked about a lot, but i did not find anything about my specific doubt.

Is it possible to unlimit the busa without putting anything on the gear sensor, like TRE or G PACK?

Is it possible to unlimit the busa directly on the ECU?

Im sorry for my english but i talk a language harder then spanish and use very litle my english

 

[Devious]

I think Johnny Cheese can answer this for you best. I think I read that it (ECU) can be flashed and reprogrammed to not limit the RPM's in 6th gear.

David

 

[nitrousjunkie]

Daveo , a member on this board does that very thing.

 

[Devious]

Daveo , a member on this board does that very thing.

Please enlighten, Grasshopper.

 

[nitrousjunkie]

Stand by sir!

 

[nitrousjunkie]

fzr007@aol.com, this is his email sir, he extends the rev to where you'll never go .

 

[Johnnycheese]

DaveO will get you more Rpms but you still will stop at 10.2K in 6th unless you do my mod

 

[JROCK]

WHAT MOD IS THAT?

 

[Devious]

WHAT MOD IS THAT?

What he said. I have heard a little about your mod but could you elaborate. I am interested.

David

 

[Johnnycheese]

send me your GPS and when you get it back your ECU will read
1-n-2-3-4-5-5

 

[JROCK]

DOESN'T MAKE SENSE? WILL ONLY WORK WITH A GPS?

 

[Johnnycheese]

DOESN'T MAKE SENSE? WILL ONLY WORK WITH A GPS?

Grasshopper do not be closed minded
G(gear) P (position)S (sender)

 

[Devious]

Sounds good. But bear with me I have not looked at the manual yet. What all do I remove and how do I remove it. I like this mod. Speak in small words and try to use mostly English.

David

 

[Johnnycheese]

picture of part


part number 38 it is behind the clutch basket

 

[Devious]

Holy Sh*t. How long does it take to get to that part. And if I wait for another month or so, or colder weather and the
X-mas holidays what would the turn around time be. And how much $$ including shipping both ways.

David

 

[Johnnycheese]

I charge one hour labor to R&R

 

[nergal]

the thing is i don't want the ecu to read 5 because the 6th gear is the most used and i don't wan't to affect the map for that gear, because it changes the performance of the bike i want it just like it is but without the cutting on 10200.

Im sure it is possible somehow



<!--EDIT|nergal
Reason for Edit: None given...|1132846385 -->

 

[Johnnycheese]

5th and 6th are the same map

 

[gtrpimp76]

Nergal. TRUST JC ON THIS ONE!! I have the same mod but it was done by Frank at Powerhouse Motorsports in NY. Better than TRE b/c keeps your maps stock except for 6th. That's the only way you'll get past 10.2 and 186mph. Result is you can launch much harder, still utilize RAM Air properly in all gears and go faster than 186

 

[Bergster]

Nergal. TRUST JC ON THIS ONE!! I have the same mod but it was done by Frank at Powerhouse Motorsports in NY. Better than TRE b/c keeps your maps stock except for 6th. That's the only way you'll get past 10.2 and 186mph. Result is you can launch much harder, still utilize RAM Air properly in all gears and go faster than 186

What he said. The best mod for top speed.