If you can, get a place off University drive. Its right in tha middle of everything and, not far at all from tha track.
Whats your best E.T. in 05 ?
- Thread starter C_Henry
- Start date
OK...I'll check for that location...
<!--EDIT|STUNNAH
Reason for Edit: None given...|1120024177 -->
Is your bike still stock length???If it is I would no recommend any lower gearing than 16/42...It's perfect for the street and track...Anymore and you will certainly wheelie way to often...I'm @ 6 over and I launched on one run she hooked and good lawd I was looking at the sky...She swapped sides of the lane and finally came down...I swapped to 2nd and she stood up again...Still ran a 6.40 something...I've still got my 42 and will more than likely be putting it back on for some street riding/racing...
Mr Brown
Registered
I'm 6 over. I can get my 60's down to about 1.65 consitently, but she's eatin clutches......
I'll prolly throw more power at her over the winter, but sprockets are cheap, so I thought I'd give it a try.
Mines the fast one..........LOL
Your running good just to have it strapped...
stickygumbo
Registered
Some nice runnin there fellas, my bikes lowered and has an air shifter, stretched 5 over and have the po boy turbo and best so far this year has been 9.49 @ 155. 17/45
What are you 1/8th mile times???Very few here that run the 1/4th...
60' 1.786
1/8 6.824 @110.61
1/4 10.382 @136.26
Mods are all the same except the cam swap. stock tire stock suspesion. These are time from last year. no drag strip time this year. And I wiegh 275 naked on a good day!
Now I have my suspesion set up a little better!
1/8 6.824 @110.61
1/4 10.382 @136.26
Mods are all the same except the cam swap. stock tire stock suspesion. These are time from last year. no drag strip time this year. And I wiegh 275 naked on a good day!
Now I have my suspesion set up a little better!
My best 1/8 is 6.82@110.61 my fastest mph is 6.876 @111.84. Stock ride height, before cam swap.
Hey i run the quater and that time is fast as hell! Whats the po boy turbo?
stickygumbo
Registered
The ET 1/8 on that run was 6.29 with a lowsy 1.66 60`.. they dont give the mph for the 1/8 at my track and its usually slippery as heck..9lbs in a shinko
The boost is the juice, running a 32 shot and thats just how much Hp it gives on top of the stock motor 163 hp with muzzy full system and a pcII.
Ive done some clutch adjustments since then and think i can get mo better ET if can just get out of the hole. I`m 185 lbs suited.
Ok, I've been reading (lurking a while) I really have learned alot here. First Crotch rocket I have ever owned (05 Busa 2 months old) raced it at 500 miles on the odometer. Stock except for 16 t front sprocket, lowered and strapped front, lowered middle hole rear. BDE Ultra clutch mod, poked a few holes in the stock cans (jsut for some sound).
I weigh 220 in gear.
Have been down the track about 30 times, still wussin on the launch, but I'm workin on it.
Best so far was yesterday in Clarksville TN
R/T .6369
60Ft 1.7241 ( I know it sucks)
330 4.447
594 6.2663
1/8 6.6761
mph 109.81
I weigh 220 in gear.
Have been down the track about 30 times, still wussin on the launch, but I'm workin on it.
Best so far was yesterday in Clarksville TN
R/T .6369
60Ft 1.7241 ( I know it sucks)
330 4.447
594 6.2663
1/8 6.6761
mph 109.81
Mr Brown
Registered
Welcome aboard. Sounds like you got the right idea. Good luck and keep us posted.
