Busa heads...

[MidnightBusainSD]

Yeah sorry about that Grab n Twist i was a bit tired when i wrote that my bad

Him
Spaz Figured with the setup the way it is now i should be running around 197hp to 200hp but i haven't had it on a dyno to confirm that yet and yes that is on pump gas as far as what spaz can do without tearing the motor down you'd have to call and ask him yourself on that one

 

[grabntwist]

Yeah sorry about that Grab n Twist i was a bit tired when i wrote that my bad

Him
Spaz Figured with the setup the way it is now i should be running around 197hp to 200hp but i haven't had it on a dyno to confirm that yet and yes that is on pump gas as far as what spaz can do without tearing the motor down you'd have to call and ask him yourself on that one

No sweat MDBISD, If spaz did the head and bore depending on your comp. ratio he probably gave you a conservative estimate. You'll probably be pulling about 215 to to the wheel. No reason you shouldn't. It would interesting to see what it would do.

 

[MET]

NE did you ever get any headwork done to the Great Green One? I've heard alot of good things about Carpenter Racing and some not so good concerning the numbers advertised! I'm looking to go somewhere a little closer its about 11 hours to JC's place and about double that to Carpenter's.......

I think their work is very good. As far as HP you just need to be very specific. I have not had head work done, srt of a waste of money on a turbo because of forced air induction.

 

[MET]

KS ya could always Give Spaz Racing a jingle near Cedar Rapids iowa not sure what he charges for head work but he did my motor heads and cams and i've been well satisfied with his work and response to my questions here is his number and we address

www.spazracing.com

1-319-651-7729

MidnightBusa...... no offense but you bike only has one head and its bore not boar unless you are talking about the animal

Just like it is <span style='font-size:15pt;line-height:100%'>your</span> not you.  We all make errors.  

<!--EDIT|Ninja Eater
Reason for Edit: None given...|1097771235 -->

 

[1127 TO 1299]

him
is it possiable to have the same typo in the same word in one post?
I think it's POSSIBLE!

...I know, I know you type real fast and don't pay attention.

just j/k

 

[grabntwist]

KS ya could always Give Spaz Racing a jingle near Cedar Rapids iowa not sure what he charges for head work but he did my motor heads and cams and i've been well satisfied with his work and response to my questions here is his number and we address

www.spazracing.com

1-319-651-7729

MidnightBusa...... no offense but you bike only has one head and its bore not boar unless you are talking about the animal

Just like it is <span style='font-size:15pt;line-height:100%'>your</span> not you.  We all make errors.  

My apologies to all including our fearless moderator NE. I believe we are all in the "Relentless Persuit of Perfection".

 

[Got-Busa?]

YES!

If you don't want Carpenter or JohnnyCheese to do it, check into Dennis (a.k.a. MOTOHEAD) in Cleveland. I don't remember exactly but I believe he was chargeing around $3,600 for a 1397 drive-in-drive-out and promissed over 215HP to the tire!

Many options depending what you want done.

He will also do a Ghetto(Turbo kit 280HP) for around $4,500 drive-in-drive-out!

For the basic mod guys it is around $1,500 for just Yosh Cams installed 185HP to the wheel. For about $500-1000 more you can get a N20 system that will get you over 220RWHP at the push of a button.

To many choices, that has been my problem for the last year......plus my wedding is coming up!

 

[him]

him
is it possiable to have the same typo in the same word in one post?
I think it's POSSIBLE!

...I know, I know you type real fast and don't pay attention.

just j/k

he i spll how da word sounds an not how its reelly splld

 

[bacharles]

headwork?

Uhh I'm having some visions of that one...