Busa Paddock stands

PaiDues said:
It does have the side screw adjustment. Perhaps, I need to loose the bottom frame holding bolt while adjusting the side mounted screw? This was all last night so maybe today, with a rested mind, I’ll see something I missed before.

Thanks for the response.
Click to expand...

Yeah, I had to have my Dad help me set up the Bursig on all 3 bikes, as all three's front tire was on the ground at first, and it is a very tedious adjustment between getting the front tire up a few inches, vs the plate no longer fitting into the frame when the bike is on the ground.
It's kind of strange too, as it's one of those things that seems like it's not going to work, yet somehow does.
An extra set of hands makes it much easier to do.
 
So the side screw adjustment does lift the front tire but it also forces the feet of the stand to become off balance if you go to far. I’m going to keep fine tuning to see if I can find the tipping point. The easier solution is better hole placement on the plate since the stand is most stable with the adj screw and corresponding bolt all the way to the left. For others who get this stand I suggest starting far left and incrementally working your way to the right.

IMG_9035.jpeg


IMG_9037.png


IMG_9036.png


IMG_9033.jpeg
 
For those who have the Motea stand with adapter plate.....Got the stand together but the instructions for the adapter plate that fits the bike are pure poop.

Does the plate mount to the stand or is it mounted to the bike?

Can somebody please explain to me how to mount it???
 
Last edited:
Bagherra said:
For those who have the Motea stand with adapter plate.....Got the stand together but the instructions for the adapter plate that fits the bike are pure poop.

Does the plate mount to the stand or is it mounted to the bike?

Can somebody please explain to me how to mount it???
Click to expand...

Bagherra said:
lineup the plate with the bike first to see the alignment and then attach it to the stand.
Click to expand...

Bagherra said:
For those who have the Motea stand with adapter plate.....Got the stand together but the instructions for the adapter plate that fits the bike are pure poop.

Does the plate mount to the stand or is it mounted to the bike?

Can somebody please explain to me how to mount it???
Click to expand...
Hold the plate up against the bike to figure out the mounting points, where the bolts will go. Attach the bolts to the plate. Attach the plate to the stand. Install the female bolt receiver to the bike.
 
I googled several great reviews before ordering or originally posting this here.
Looking again today I now see lots of reviews on nothing delivered, no contact, and non working tracking.
Makes me wonder how deep some of these scams go.
It does check out as supposedly a real building in Germany.
Oh well
 
sixpack577 said:
I googled several great reviews before ordering or originally posting this here.
Looking again today I now see lots of reviews on nothing delivered, no contact, and non working tracking.
Makes me wonder how deep some of these scams go.
It does check out as supposedly a real building in Germany.
Oh well
Click to expand...
I never got any tracking. I received an email saying my order was preparing to be shipped that day, then unexpectedly it was at my door days later.
 
sixpack577 said:
It does check out as supposedly a real building in Germany.
Click to expand...

You have an outstanding order from Germany? They very well may have taken several weeks for Christmas vacation. And Europeans that do this do not bother to tell anyone. Perhaps that is because they think everyone works like they do.

I had a vendor drop off of the map through last December while I had an impending order and was expecting some sort of response.

Good luck gents.
 
Hayabusa Wannabe said:
You have an outstanding order from Germany? They very well may have taken several weeks for Christmas vacation. And Europeans that do this do not bother to tell anyone. Perhaps that is because they think everyone works like they do.

I had a vendor drop off of the map through last December while I had an impending order and was expecting some sort of response.

Good luck gents.
Click to expand...

...but the guys who ordered theirs after me got theirs days ago!
lmao!
and coming from china is more like it
lol
 
sixpack577 said:
How long did it take to recieve yours?
I checked my tracking number today and it does not work.
I had to open a case with Paypal to get my money back...which says to give the seller to 1-7-25
wth!
The site checks out as legit without scams too
yay
Click to expand...
i got mine in about 10 days from when i placed the order. I just ordered the rear stand with swivel wheels earlier this week. Site says should be delivered 3rd week of January.
 
You must log in or register to reply here.

Similar threads

T
paddock stands
Replies
19
Views
2,872
PaiDues
P
Dookoo
Bursig Paddock Stand. Never going back to my Pit Bull
2 3 4
Replies
60
Views
12,759
BusaBus
BusaBus
B
Motorcycle Stands....quick question
2
Replies
21
Views
2,438
RedBull
RedBull
EJM05
Will this fit the 1st gen busa??
Replies
7
Views
836
flynlow
flynlow
Trent
Motomfg Paddock Stand
Replies
12
Views
2,868
Blanca BusaLess
Blanca BusaLess
Back
Top