Busa Paddock stands

[RevengeFish]

I've looked around quite abit, here is my recommendation for a rear paddock stand:

For those not in the US that find Pitbull or Woodcraft too expensive due to shipping, check out the Bike-Lift RS 17 XL stand- its SOLID.
It has the perfect leverage to push the rear up as from the ground to the spools height is just 27cm

there are quite a few sites that sells it, this is one of them:

BIKE-LIFT RS-17/XL REAR LIFT MOTORBIKE STAND

www.brixiamoto.com

 

[Bagherra]

Hold the plate up against the bike to figure out the mounting points, where the bolts will go. Attach the bolts to the plate. Attach the plate to the stand. Install the female bolt receiver to the bike.

Finally got around to setting everything up...

The bolts that attach the plate to the stand are waaayyyyy too long. They stick out about as far as the pins that go into the bike....

wtf...

 

[PaiDues]

Finally got around to setting everything up...

The bolts that attach the plate to the stand are waaayyyyy too long. They stick out about as far as the pins that go into the bike....

wtf...

They also thread into the bar that fits between the plate and stand. Do you have the bar installed?

 

[Bagherra]

They also thread into the bar that fits between the plate and stand. Do you have the bar installed?

What bar?

PM sent...

 

[PaiDues]

What bar?

PM sent...

I believe screwing on the bar is in the instructions. I’m not at home at the moment.

 

[sixpack577]

and I'm still being given the runaround by Motea, that they have to confirm with Fed-Ex, blah blah...it's been 6 weeks, wth.
I just emailed them again, and will give it a little longer since a couple of you already got your stands.
I still have an open case with PayPal to get my money back, but I really want the stand.
Their customer service sucks.

 

[Bagherra]

that sucks....i placed order on 18 Dec and still havent heard from them either. Crazy cuz my first stand arrived in about 2-3 weeks....

 

[Bagherra]

and I'm still being given the runaround by Motea, that they have to confirm with Fed-Ex, blah blah...it's been 6 weeks, wth.
I just emailed them again, and will give it a little longer since a couple of you already got your stands.
I still have an open case with PayPal to get my money back, but I really want the stand.
Their customer service sucks.

What email did u use to contact them?

 

[sixpack577]

What email did u use to contact them?

Customer Service | Motea GmbH <shop.en@motea.com>

This is one that they have been contacting me from.

 

[Bagherra]

thanx!

 

[sixpack577]

thanx!

You're welcome...good luck

 

[sixpack577]

PayPal refunded my money today.
Motea had some really good reviews before I placed my order, and I'm glad that a couple of people here got theirs, but for me...they were absoloutely useless.
Either no answers to emails, or bs that they were "waiting on Fed-Ex"...like they were going to magically find it after over 6 weeks, and the tracking never did work.
I apologize for ever recomending this sorry azz company.
I would've liked the stand, and am not about to spend $800 on a second Bursig stand, oh well...I'll put the $260 towards Gold valves in my forks.

 

[Bagherra]

Finally got my rear stand last week while i was out with flu. I hit Motea up on IG and they responded saying they were gonna contact shipping and see where it was. Showed up 2 days after that. Instruction suck but i figured it out.
Was all set to order a front stand, but imma hold off....

sorry bout your luck sixpack577...

 

[sixpack577]

Finally got my rear stand last week while i was out with flu. I hit Motea up on IG and they responded saying they were gonna contact shipping and see where it was. Showed up 2 days after that. Instruction suck but i figured it out.
Was all set to order a front stand, but imma hold off....

sorry bout your luck sixpack577...

Thanks, but as said, I'm just glad that you guys got your stands...and I already spent the refund money on Gold valves for my forks, and a few other small parts...I try to work within a budget...Try, lol

 

[Bumblebee]

A little late to the game but these stands look interesting....

 

[Bumblebee]

Double post......

 

[Bumblebee]

Triple post.....

@jwcfbd I think there might be an issue when posting as this is the second thread that an error message came up when posting and I enede up with multiple posts..............and I don't have the computer skills to take a screen shot.....

 

[BigBSBusa]

A little late to the game but these stands look interesting....

Those look pretty cool and useful!

 

[sixpack577]

A little late to the game but these stands look interesting....

I've seen those.
They look like they work well, but the extra length, as well as the really high price keep me looking for other options.
There used to be several companies making Bursig style stands, but the Motea was the only other one that I could still find.
I've also unfortunately read alot of negative things about Bursig in the last couple of years, as far as people not getting their orders from them either.
And I love my Bursig stand, and 15 years and 3 bikes later it's still great.
I paid $700 for it then, but just can't bring myself to pay over $800 shipped for one now, especially since they dropped below $500 a few years ago, but have quickly climbed back up.
Would I like another Bursig? Yes
Do I need one? No...which kind of makes it hard to spend that much money...money that could go into the bike itself.
Oh well, the hunt goes on.

 

[michael parris heuberger]

I've seen those.
They look like they work well, but the extra length, as well as the really high price keep me looking for other options.
There used to be several companies making Bursig style stands, but the Motea was the only other one that I could still find.
I've also unfortunately read alot of negative things about Bursig in the last couple of years, as far as people not getting their orders from them either.
And I love my Bursig stand, and 15 years and 3 bikes later it's still great.
I paid $700 for it then, but just can't bring myself to pay over $800 shipped for one now, especially since they dropped below $500 a few years ago, but have quickly climbed back up.
Would I like another Bursig? Yes
Do I need one? No...which kind of makes it hard to spend that much money...money that could go into the bike itself.
Oh well, the hunt goes on.

HI. I would like one but they will not fit my 1999 busa.