Gen2 HID install

Re: Blanca's new Granny Blinders....

Nice step by step pics of the install! You are right... your ballasts are different then the ones I have on both my bikes! But they work! I had to use my phone too post and look at the pics! Nice BRIGHT LIGHTS NOW! Now it may be time to upgrade the horn! I need to on both bikes. The 02 1K has a airhorn on it! THE STOCK HORNS SUCK!
Posted via Mobile Device
 
Re: Blanca's new Granny Blinders....

No issues with start up . Tim explained to me how to go thru the motions of starting without lights being on.
I believe you turn killswitch on then push starter in and hold it.
While holding starter button down turn key on and lastly draw in clutch to start bike.
This was the HIDs don't light until the bike actually starts and there is no power drain .
Again great tip from my new bestus fwend WarbirdII.

My goal is to separate myself from all the others by standing out during daytime.
Too many people look right thru me.
Hopefully now with both beams on during the day folks will notice me a little more.
 
Last edited:
Re: Blanca's new Granny Blinders....

I was tired and my brain wasn't working right :whistle:. They both do come on when the high is on. I have two different colors now that I remember bright white low and a yellow stock high. Very nice write up Saiid :thumbsup:
 
Re: Blanca's new Granny Blinders....

memphistn3000 How much will you charge me to go to Corkys BBQ and buy 50 sammichs, freeze and fedex them to me ?
Lots of Hot sauce too...!
 
Re: Blanca's new Granny Blinders....

Looks good, nice write up. I been wanting to this mod for a while, and looking at your pics, make it look fairly simple. thanks for the post. I guess I'm going to order DDM's 35w 6k. kit tomorrow, maybe I'll have them by the weekend to hook up. Brian
 
Re: Blanca's new Granny Blinders....

Really is pretty simple to do.
I have WarbirdII/Tim to thank for making me sure of myself .

Actual hookup and tying off of HID kits is about 30 minutes.
Just takes one hour to get there and one hour to put it back together.
 
Re: Blanca's new Granny Blinders....

Looking good.. the hardest part is taking all the crap off the bike! And the "resistor" is actually the igniter..
 
Re: Blanca's new Granny Blinders....

I figured I was misnaming it .
That right there should convince anyone still worried about how to do to just do it.
Me a guy who doesn't even know the names of the pieces he is hooking up did it.
Along with help over the phone even I got it done.
 
Re: Blanca's new Granny Blinders....

Are those 6k's? Sorry if it was mentioned and i overlooked it..
Also how long did it take you to get them from DDM?

Thanks
 
Re: Blanca's new Granny Blinders....

So, you look ready to do mine now :laugh:

I love Corky's wet ribs :beerchug:
 
Re: Blanca's new Granny Blinders....

xchief1320 Both are 6k 35w single motorcycle HID kits from DDM.
I ordered them before Christmas and just got them only cuz they said they had a rush during the holidays.

I still cant believe you get all that for 25 bucks each !
 
Re: Blanca's new Granny Blinders....

Just finished installing and wow done in 3 hours, I do have to go back and ziptie few more things but cant wait to try it out once this rain stops. :cheerleader::bowdown::thumbsup:
 
Re: Blanca's new Granny Blinders....

Good did any of my pics help or are you smarter than me ?
Pics ?
 
You must log in or register to reply here.

Similar threads

RACER_X
DDM HID install
2
Replies
27
Views
4,675
MadLight
MadLight
H
How to strenghten HID bulb housing?
Replies
2
Views
686
klatu848
klatu848
H
finally got my ddm h9 highbeam today!!
Replies
4
Views
2,159
hemi
H
skydivr
Adjusting HID's on GenII
Replies
12
Views
1,271
skydivr
skydivr
H
HID Adjustment ?
Replies
6
Views
788
xhilaratorboosa
xhilaratorboosa
Back
Top