sweet tea man
Registered
hey, btw, i saw the thread....congrats on the new house man!
so whatson your "to-do" list before the bash?
- Thread starter sweet tea man
- Start date
CrashTestDanny
Registered
rear-facing camera on the ST. Replace the fuse for the heated grips... Gotta remove the left cowl for that... 
Find money to pay GixerHP for my HID 
Find money to pay GixerHP for my HID 
sweet tea man
Registered
progress for me
assembling with the new paint:
new exhaust on, the kanji, gauges, and tank pad are all on the way. coolant and oil being changed
its getting close......
assembling with the new paint:
new exhaust on, the kanji, gauges, and tank pad are all on the way. coolant and oil being changed
its getting close......
Lets see.
1) install the new chocks on the trailer
2) Build preamps for the microphones
3) install said preamps somewhere on the bike
4) Install the hardwiring for the radar detector
5) Install the belly cam in the street fairings
6) Extend the rear camera mount
7) Test the A/V system again, and make any additional corrections (engineering by trial and error).
8) Swap the 40 tooth rear sprocket with the 42 tooth
9) Maybe swap the street rubber for the race rubber.
1) install the new chocks on the trailer
2) Build preamps for the microphones
3) install said preamps somewhere on the bike
4) Install the hardwiring for the radar detector
5) Install the belly cam in the street fairings
6) Extend the rear camera mount
7) Test the A/V system again, and make any additional corrections (engineering by trial and error).
8) Swap the 40 tooth rear sprocket with the 42 tooth
9) Maybe swap the street rubber for the race rubber.
Rayabusa0818
Never Forgotten
Not a thing except pack up and go
You really want to know, well as of this evening, here is the list!
Tony's bike
Hid's
front and rear brakes
front lines chain and sprockets
Grumpy's bike
finish tuning on the dyno,, first numbers stand at 205 at the wheel!
Front and rear brake lines
Rear reservoir
Oil change
rear tire
reassemble bike
My bike
Oil change
finish up the powercommander stuff, Hub lcd screen ignition module!
few other nit picking things!
Trailer
move a couple of wheel chocks
finish mounting stuff, on the walls
grease bearings
Excursion,
wire in xm radio
mount and wire brake controller
Myself
Go to liquor store LOL
Pack
maybe sleep a little
Think that about covers it!
Tony's bike
Hid's
front and rear brakes
front lines chain and sprockets
Grumpy's bike
finish tuning on the dyno,, first numbers stand at 205 at the wheel!
Front and rear brake lines
Rear reservoir
Oil change
rear tire
reassemble bike
My bike
Oil change
finish up the powercommander stuff, Hub lcd screen ignition module!
few other nit picking things!
Trailer
move a couple of wheel chocks
finish mounting stuff, on the walls
grease bearings
Excursion,
wire in xm radio
mount and wire brake controller
Myself
Go to liquor store LOL
Pack
maybe sleep a little
Think that about covers it!
You really want to know, well as of this evening, here is the list!
Tony's bike
Hid's
front and rear brakes
front lines chain and sprockets
Grumpy's bike
finish tuning on the dyno,, first numbers stand at 205 at the wheel!
Front and rear brake lines
Rear reservoir
Oil change
rear tire
reassemble bike
My bike
Oil change
finish up the powercommander stuff, Hub lcd screen ignition module!
few other nit picking things!
Trailer
move a couple of wheel chocks
finish mounting stuff, on the walls
grease bearings
Excursion,
wire in xm radio
mount and wire brake controller
Myself
Go to liquor store LOL
Pack
maybe sleep a little
Think that about covers it!
Can I add to your list?
Just had new front fork seals put on,
new stering head berings put on,
im putting the EBC HH front brakes on,
im putting the 42 tooth sprocket on,
clean bike up,
pack,
haul butt up to the gap to see all of you fine folks!
new stering head berings put on,
im putting the EBC HH front brakes on,
im putting the 42 tooth sprocket on,
clean bike up,
pack,
haul butt up to the gap to see all of you fine folks!
Similar threads
