What Did You Do To Your Busa, Today?
- Thread starter SoCal Blur
- Start date
My Busa
Registered
I learned some things today with the help from a forum member.
I Got a Zero Gravity Double Bubble wind screen installed, new spark plugs, new air filter, added a push pin that was missing, replaced 2 fake fairing screws with real ones, Had my fairings removed, cleaned, polished and re-installed..
I rode the busa up an icy driveway(nice!)
Busa completely cleaned & ready for the season :goodidea:
I Got a Zero Gravity Double Bubble wind screen installed, new spark plugs, new air filter, added a push pin that was missing, replaced 2 fake fairing screws with real ones, Had my fairings removed, cleaned, polished and re-installed..
I rode the busa up an icy driveway(nice!)
Busa completely cleaned & ready for the season :goodidea:
adamnflorida
Registered
Put on a smaller rear sprocket but then ran out of room for adjustment, so i made some new axle blocks..turned out ok..
SoCal Blur
Registered
Did the Buell peg mod this morning. Best 20min Mod out there!
Just back in from a ride with the wife. Beautiful day
voodoolord
Registered
Second oil change since I bought her. Was a lot easier the second time around.
voodoolord
Registered
Did the Buell peg mod this morning. Best 20min Mod out there!
How do they feel over the stock pegs without the rubber? What year pegs? Looks nice.
voodoolord
Registered
SoCal Blur
Registered
They feel lighter (which they are) than the stock pegs.... I know that's a strange description, but you know you don't have those heavy blocks under your feet when you are riding. I didn't notice any increase in vibration transmitted through the pegs. I don't know what year they are. I bought the mod from GSX1300R-T, a member here on the forum. He makes them ready to install. I'm sure if you PM him, he'll tell you what year pegs he uses.
SoCal Blur
Registered
I completed the 16bit to 32bit ECU/Rotor upgrade on my 2000 busa. It was pretty simple...a lot easier than I thought it would be. Total time was probably about 1 1/2 hours.
Pbadasay
Registered
I don't know if I like it or not or if its something that's just going to take time to grow onto me but I put some rim tape on the wheels....how do they look, in your opinion? ??? I thought they were pretty cool with the hayabusa/kanji logo on them...each wheel has the logo imprinted twice so it's not annoyingly overprinted like some other tapes I've seen.
Ready to put it all back together! Winter Mods are done! 
Winter Mods completed are: new Headlight Modulator, twin PIAA horns, T-Rex non-cut Sliders, LED light strips inside the Intakes, and LED Fog Lamps hidden inside the intakes. And the headlight shipped off to SportBikeLites.com to have all new Dual LED Rings installed inside the headlight.
Winter Mods completed are: new Headlight Modulator, twin PIAA horns, T-Rex non-cut Sliders, LED light strips inside the Intakes, and LED Fog Lamps hidden inside the intakes. And the headlight shipped off to SportBikeLites.com to have all new Dual LED Rings installed inside the headlight.
Woot!! Adding mirror extenders from PMR. Solid billet, nice.
http://www.pashnit.com/product/pmr/mirror_accessories.html#top
http://www.pashnit.com/product/pmr/mirror_accessories.html#top
SoCal Blur
Registered
I had billet mirror extenders on my busa. Swapped them out with SV650s mirrors. Those mirrors are longer than the stock busa mirrors with extenders and, IMO, look a lot better.
Bought 4 quarts and a filter for her. 500 miles to next change. Rear tire and front brake pads sitting in the garage.
Similar threads
