who's got the tsukigi hookup?

[craigntx]

greetings folks
Ike has been good for me, tons of work.
time to put an ehaust on my 07.
have priced a titanium tsukigi for
$979
unsure if this is spec 2.
does the spec2 run much more?
any eperience with these or advice would help.
thanks
craig

ps what about a mileage challenge?
i got 12,700 on my 7 month old

 

[Mr Bogus]

price is about right... only down side is you can not wrap a full titanium system.. you can wrap the pipes if they are stainless up front..

I had 18K on my bike at 6 months old.. a lot of west coast guys rack up a ton of miles..

 

[craigntx]

found a titanium with stainless midpipe on sale for $850 http://www.exoticsportbike.com/gsx1300r5.htm

 

[proud dad]

 

[dmrowe]

I have the Tsukigi Stainless on my '06 and it is outstanding and your pricing is about right even two years after I bought mine. Love the performance and the sound, after I finished all the mod's (exhaust, airbox mod, pair valve removal, BMC Race, PCIII and a custom map) produced 178 RWHP. Why don't you check with GPW (Craig) on pricing he is a sponsor here and I remember him telling me there was no difference in the Spec. 2

 

[Mr Bogus]

sounds pretty good.. the pipes look to be of great quality too.. Ts seems to have a good quality control and the attention to detail looks good..

 

[craigntx]

I have the Tsukigi Stainless on my '06 and it is outstanding and your pricing is about right even two years after I bought mine. Love the performance and the sound, after I finished all the mod's (exhaust, airbox mod, pair valve removal, BMC Race, PCIII and a custom map) produced 178 RWHP. Why don't you check with GPW (Craig) on pricing he is a sponsor here and I remember him telling me there was no difference in the Spec. 2

ooh, if i add cams too i should b around 188 rwhp
thanks for the info

 

[dadofthree]

:moderator:

 

[99'busa]

tsukigi is the way to go IMO.

850 is what I paid.

 

[NINJA KILLER]

I have the Tsukigi Stainless on my '06 and it is outstanding and your pricing is about right even two years after I bought mine. Love the performance and the sound, after I finished all the mod's (exhaust, airbox mod, pair valve removal, BMC Race, PCIII and a custom map) produced 178 RWHP. Why don't you check with GPW (Craig) on pricing he is a sponsor here and I remember him telling me there was no difference in the Spec. 2

+1 GPW will hook you up , Greg sold me a Full Tsukigi Spec 2 Titanium Exhaust and sent it to Jet Hot & coated it inside & out. That system makes Great HP & Trq #'s. Keep in mind though, Your pipe and mods are only as good as the tuner that does the work.

 

[craigntx]

+1 GPW will hook you up , Greg sold me a Full Tsukigi Spec 2 Titanium Exhaust and sent it to Jet Hot & coated it inside & out. That system makes Great HP & Trq #'s. Keep in mind though, Your pipe and mods are only as good as the tuner that does the work.

where's his banner?
also my shop hasn't done this type b4.
i understand some cutting wll be required to make the fit.
what's he got to look forward to?
any tips?
thanks again, and great pics there

 

[99'busa]

where's his banner?
also my shop hasn't done this type b4.
i understand some cutting wll be required to make the fit.
what's he got to look forward to?
any tips?
thanks again, and great pics there

theres no cutting that im aware of.

 

[craigntx]

its shaving of a fairing bracket or bottom fairing, iirc

 

[99'busa]

its shaving of a fairing bracket or bottom fairing, iirc

not on mine.

 

[NINJA KILLER]

theres no cutting that im aware of.

There was a little trimming to do by the Brake side fairing but not enough to worry about. Look under Sponsors & go to Hyperbike Performance Center ( GPW ). You get all the info from his website for a contact .

 

[99'busa]

There was a little trimming to do by the Brake side fairing but not enough to worry about. Look under Sponsors & go to Hyperbike Performance Center ( GPW ). You get all the info from his website for a contact .

now i gotta go look at mine

 

[craigntx]

now i gotta go look at mine

https://www.hayabusa.org/forum/general-bike-related-topics/86857-tsukigi-canon-05-gen-i.html
found this

 

[99'busa]

https://www.hayabusa.org/forum/general-bike-related-topics/86857-tsukigi-canon-05-gen-i.html
found this

I just checked mine and nothing is cut

i remember that. i would rather have a cannon too

 

[NINJA KILLER]

wait a min. do you have an 08? I just checked mine and nothing is cut but mines gen I

Mine is a 2007 , My tuner trimmed mine out just so I wouldn't be close to the fairing. I got picky and was worried about smoking the fairing's.

 

[99'busa]

Mine is a 2007 , My tuner trimmed mine out just so I wouldn't be close to the fairing. I got picky and was worried about smoking the fairing's.

ohhh okay. mine is close too. but my tuner/builder has done tons of em' and didnt do anything about my fairing and luckily all is fine. You'd sure think it do something though. but alll is good