202mphbusa
Registered
Hi Today I have started to look into DEI Cryogenic systems to cool the intercooler more and cool the fuel also and to rap the turbo and fuel lines.
Hi Today I have started to look into DEI Cryogenic systems to cool the intercooler more and cool the fuel also and to rap the turbo and fuel lines.
Hi. Interesting do you watch the vids by Gale Banks ? And THANK YOU.
I That is all new to me. I looked it up I would call and talk to them, but no phone number.
This is an interesting concept, I know it is totally a non-starter for motorcycles but.....
The prep on the motor to paint It will be painted this week. The off to be put together by Rick. Than off to DAS for the ECU and to short neck the bike. Than to prep the frame for paint too.I That is all new to me. I looked it up I would call and talk to them, but no phone number.
Most are running on m1 no need to intercooling at all on m1What do the street outlaw guys run in their Intercooler tanks?
I see vapor coming out
some kind of gycol dry ice thing going on?
Hi. More room for a bigger turbo. I also have a custom triple tree by Unit 5 and One Stop Speed 609-798-1798 It is a 1 inch + offset again more room for bigger turbo, I also run a 120/60/17 front tire again same.
You are going to paint and not powder coat the frame? What color are you gonna go with?Hi.
The prep on the motor to paint It will be painted this week. The off to be put together by Rick. Than off to DAS for the ECU and to short neck the bike. Than to prep the frame for paint too.
Hi. It will close to Cerakote lollipop purple there C-163 color, but it not pop with me so I am going with a Tri cote. I will mix it up myself in our paint shop. The motor is being painted in there Transfer Grey there # C 187.You are going to paint and not powder coat the frame? What color are you gonna go with?
Hi. If I had F1 money to spend on my motor. I payed $750.00 for my 4 pistons, about $91,000.00 each.Hi. It will close to Cerakote lollipop purple there C-163 color, but it not pop with me so I am going with a Tri cote. I will mix it up myself in our paint shop. The motor is being painted in there Transfer Grey there # C 187.
HI. My motor cost about $19.750.00, an fi motor about $9.950,000.00. The pistons withstand 200G's. 1500cc could make 1400HP. but could last only 5 laps. If I could have there Tech and there money.Hi. If I had F1 money to spend on my motor. I payed $750.00 for my 4 pistons, about $91,000.00 each.
Hi. The piston to wall clearance is so tight that the pistons are seized in the block when cold, they have to run hot water and hot oil through the motor for 1/2 hr before they can start the motor.HI. My motor cost about $19.750.00, an fi motor about $9.950,000.00. The pistons withstand 200G's. 1500cc could make 1400HP. but could last only 5 laps. If I could have there Techand there money.
Hi. I am off to see Eric at DAS in the am. Nobody likes F 1 stuff. Like in the 80s fuel was 1,612.00 a gallon. Fuel cost was around $285,000.00 a weekend. And I think I am spending mad money on my bike.Hi. The piston to wall clearance is so tight that the pistons are seized in the block when cold, they have to run hot water and hot oil through the motor for 1/2 hr before they can start the motor.
Tell him "Kent: says heyHi. I am off to see Eric at DAS in the am. Nobody likes F 1 stuff. Like in the 80s fuel was 1,612.00 a gallon. Fuel cost was around $285,000.00 a weekend. And I think I am spending mad money on my bike.
Tell him "Kent: says hey
What time are you heading there?Hi. I sure will.
Hi. It is about 1 hr and 45 min away I am leaving at 7.30What time are you heading there?
Hi I told him you said hi. I bought the MAXX RACE H2O. Talk about the fuel system I going with 8 injectors. Now to talk to Richard at RCC.Hi. It is about 1 hr and 45 min away I am leaving at 7.30