My Very Slow Build

[michael parris heuberger]

Put some fancy beringer brakes on this masterpiece

Hi. No. I do not like th way the Beringers look. I have something planed and if it works out it will be kind of wild.

 

[Dnyce]

Interesting... something like the buell brakes maybe, that huge rotor mounted on the outer edge of the wheel? Curious to see what u do

 

[TonyM995]

Are you going to have all of the extra fairings like Bill Werner or are you going to have a street looking bike?

 

[michael parris heuberger]

Are you going to have all of the extra fairings like Bill Werner or are you going to have a street looking bike?

Hi. A 100% street legal bike. It will look like an XDA.

 

[TonyM995]

Hey Michael, how’s the build going? Do you have any updated pictures?

 

[michael parris heuberger]

Hey Michael, how’s the build going? Do you have any updated pictures?

Hi. No no mew pics yet I am waiting for my frame mods to be done short neck moving up the swingarm pivot up 12mm's and Total Seal pistons rings and my Marvic rear wheel from DME. Also sensors and a few other parts so by spring things will be going togather. I hope.

 

[michael parris heuberger]

Hi. No no mew pics yet I am waiting for my frame mods to be done short neck moving up the swingarm pivot up 12mm's and Total Seal pistons rings and my Marvic rear wheel from DME. Also sensors and a few other parts so by spring things will be going togather. I hope.

Hi. My front rotors from DME and my tear wheel should be in soon. Front wheel has had the speed sensors fitted and I will be picking it up Saturday.

 

[TonyM995]

Nice!!!

I’m over here thinking about your build and waiting to see it like this:

 

[michael parris heuberger]

Nice!!!

I’m over here thinking about your build and waiting to see it like this:

View attachment 1662561

Hi. Front rotors from DME with a little purple paint work. They look black untill the light hits them.

 

[michael parris heuberger]

Hi. Front rotors from DME with a little purple paint work. They look black untill the light hits them.

View attachment 1663554

View attachment 1663555

View attachment 1663556

View attachment 1663557

Hi. The front rotor with the bolts in place and the rear. The paint on the edges of the rotor

 

[michael parris heuberger]

Hi. The front rotor with the bolts in place and the rear. The paint on the edges of the rotor

View attachment 1663567

View attachment 1663568

View attachment 1663569

View attachment 1663570

View attachment 1663571

View attachment 1663572

Hi. Anyone care to take a guess to what these are to be used for on my motor.

 

[michael parris heuberger]

Hi. Anyone care to take a guess to what these are to be used for on my motor.

View attachment 1664860

View attachment 1664861

Hi. Some of the other parts I picked up at DAS the other day. The bike will be wired with all milspec wirw some little connectors are $30.00 each.

 

[michael parris heuberger]

Hi. Some of the other parts I picked up at DAS the other day. The bike will be wired with all milspec wirw some little connectors are $30.00 each.

View attachment 1664956

View attachment 1664957

View attachment 1664958

Hi. Did anyone see post #551? No guesses on what thoes parts in the pic are for. A disel tech should know.

 

[ottafish]

Hi. Did anyone see post #551? No guesses on what thoes parts in the pic are for. A disel tech should know.

View attachment 1664960

Glow Plugs?

 

[michael parris heuberger]

Glow Plugs?

Hi. @ ottafish no I will have to drill and tape 2 holds in the base oil pan to put them in. They are to heat the oil and motor before start up. This is kind of F1 tech. It is because I will run VP M1. Eric at DAS uses them on his supercharger XDA bike. It is not because we run the clearances so tight that it will not even turn over when cold.

 

[202mphbusa]

Hi. @ ottafish no I will have to drill and tape 2 holds in the base oil pan to put them in. They are to heat the oil and motor before start up. This is kind of F1 tech. It is because I will run VP M1. Eric at DAS uses them on his supercharger XDA bike. It is not because we run the clearances so tight that it will not even turn over when cold.

But they run them because they run a dry block and can not warm the oil to temp by running the bike long enough

Oil preheater is not a bad idea but on a wet block unless you are running STUPID valve lift or compression and can't just run the motor to warm it
I don't feel it's needed. Plus more BS for me to bring to the track

 

[202mphbusa]

When does the build start?
What is left to bench assemble the motor?

 

[michael parris heuberger]

But they run them because they run a dry block and can not warm the oil to temp by running the bike long enough

Oil preheater is not a bad idea but on a wet block unless you are running STUPID valve lift or compression and can't just run the motor to warm it
I don't feel it's needed. Plus more BS for me to bring to the track

Hi. @202mphbusa. Eric said I should because of the VP M1

 

[michael parris heuberger]

When does the build start?
What is left to bench assemble the motor?

Hi. I will be putting it togather this April. At Ricks.

 

[202mphbusa]

Hi. @202mphbusa. Eric said I should because of the VP M1

I would warm it on Gasoline
then switch it over
Idling M1 that long tends to contaminate the oil