Knee pads are tech spec
What did you do to your Gen 3 today?
- Thread starter sgerry
- Start date
Tony Nitrous
Registered
I had another owner question why, If the 3 is so good did I later buy a Gen-2.
I absolutely love the Gen-3, after several Busa’s it’s the best I’ve ridden, but I don’t want it to be long, low, loud, without mirrors etc etc, so another toy means it gets to stay as nice as it is.
Jgarcia6988
Registered
Can anyone help me how to cut the cowl what tools to use myself ? Thank you
slidermike
Registered
Dremel and painters tape. Tape it out and take your time. Measure twice, cut once mindset.
dcnblues
Registered
And don't have a moment of retardation where, because you flipped the cowl upside down to cut it, you get the front and back confused. I ...heard about somebody who did that. (Fortunately it was on the inner black part to make clearance for a top case mount and the error didn't matter).
The really big mistake you don't want to do is to be distracted when removing the whole rear fairing. Or rather I should say putting it back on. Because it is so easy to forget to reconnect the cowl lock cable. Your oversight will most likely occur to you in the half second after you click the rear cowl back into locked position. That's one that will have you throwing a chair through a window in frustration...
The really big mistake you don't want to do is to be distracted when removing the whole rear fairing. Or rather I should say putting it back on. Because it is so easy to forget to reconnect the cowl lock cable. Your oversight will most likely occur to you in the half second after you click the rear cowl back into locked position. That's one that will have you throwing a chair through a window in frustration...
Except for the maxxecu standalome,this is my first and only mod I did over the weekend (tank protector)
Took it out to eat, got wet
SS4Luck
Registered
Finally got around to installing some of the carbon poop I’ve had sitting in my garage for months. Everything isn’t snuggled up yet, fitment is okay if you’re not a perfectionist. I’ll break out the drill and move some material around to get it as close as I can. I also have a significantly more intense LED coming for the headlight so that’ll be a fun science project.
Headlight: Alifperformance
Windscreen panel: motocomposites
I also ordered carbon panels that the mirrors bolt through but they’re on 3-6 week back order
Headlight: Alifperformance
Windscreen panel: motocomposites
I also ordered carbon panels that the mirrors bolt through but they’re on 3-6 week back order
busa_berto
Registered
Installed the dark smoke zero gravity double bubble windscreen
SS4Luck
Registered
I love my Zero Gravity windscreen, follows the lines so much better than the Puig I had.
Any more info on the RX7, I tried to look you up on IG but couldn't find you lol
busa_berto
Registered
Ohhh yea I currently deactivated my page but I'll be back soon lol but yea I loved the ZG over the puig because it's not as tall and it definitely goes better with the shape of the front fairing.
As far as the rx7, that's my street strip girl lol still rotary, 13b from 3rd gen rx7, single 69mm borg turbo, e85,@ 33psi she made 675rwhp, Ford 8.8 rear end, 8.50 cage, all the works of a safe/fun/fairly reliable street car. I drive it to meets , work, grocery store. But also does 9s in the 1/4. Love that thing! Lol
Well; I rode it, but ……… I also changed the oil and oil filter, as well as the front brake pads. 3rd set of front brake pads 10th oil change.
SS4Luck
Registered
Any Mazda that is still a rotary is just epic anyway. My best friend is from the PR and he got me into the Doritos instead of LS swapping everything
busa_berto
Registered
Yea u gotta be a special type of crazy to be into these wankels lol but honestly I wouldn't change it. I love my brap mobile and it's never let me down...I actually have a 6.0 lq4 in my garage and a th400 I'm considering throwing in another rx7 I'll be getting soon from a buddy just to have the best of both worlds lol
And its only a matter of time before the gen 3 busa is boosted all in due time lol
SPECIALFORCESOFGOD
Registered
I'm from Puerto Rico, and culturally, we are not weary of rotaries the way people from the CONUS are. Even older female friends of mine who are not gearheads have spoken fondly of the rotaries their exes had in their Turbos, Starlets or GLCs.
busa_berto
Registered
I have a starlet in my backyardI'm from Puerto Rico, and culturally, we are not weary of rotaries the way people from the CONUS are. Even older female friends of mine who are not gearheads have spoken fondly of the rotaries their exes had in their Turbos, Starlets or GLCs.
Similar threads
