Ked0607
Registered
Woolich gen 3 unlocked?
- Thread starter Ked0607
- Start date
Ked0607
Registered
They listed it but it's not released to the public yet. Moore himself hasn't got it yet.
Robert 0046
Registered
So its already on the streets where are the numbers?
Ked0607
Registered
Not released yet.
Ked0607
Registered
Thanks for popping in and clarifying this. I am very curious how this are going with that test bike. We are all salivating and curious what final release features are going to look like. I am surely down for a unit for myself. Any word on pricing yet? Is it similar to say the 2019? Throw us some more info if you can. Thanks!!!!So I'm assuming this is why I had several tickets per hour in our support system today asking about the new Busa.*Forrest Gump waves to all of those who created a ticket*
Questions/Concerns About the Product Listing
It is just a temporary listing that we need in order to test some software side of things as well as our own infrastructure pushing definition keys down to accounts, MapShare working correctly, so on so forth. This is why you don't see any specific hardware listed yet as to what interface it uses, harnesses and just have general info and harnesses listed for the time being.
"But the bin file definition key shows on the website!"
The bin file definition key... again needed to test. If you buy it now, like many have, it won't actually unlock in your account. If you do buy it in advance - it will automatically be available once it releases. Otherwise it's not doing much for you getting the definition now. If you were one of the many who did already and want a refund, let us know by way of ticket. We will yoink it off your account and we'll refund it so you can re-purchase when it's launched. Otherwise if you are happy with waiting, when it's ready you will be able to update your software and view/access it immediately.
My take? Just wait and buy it with either of the all inclusive kits. That way you don't have any confusion as to why you need to buy another definition if you already purchased one and have to create a ticket to ask about just buying this, that and the other. If you get the all inclusive kit - that will all be done for you from the get go.
Or if you already have a compatible interface, then you will just need the harness and definition. Easy peasy.
Other Hardware Questions, Requirements, Etcetera
Once released the entire products page will be overhauled and everything updated; the interface required, compatible harnesses, complete packages, features available, etc. I'm not able to give too much away at the moment... But we will have both bike flashing available as well as bench flashing available at release. So those who like to tinker on their own or prefer tuning on the dyno with a reputable tuner will be satiated as will those tuners who offer send in tunes or those who just want a quick easy flash done for them by a reputable tuner.
Plans
There are a few things we want to do, but if we get to a point where we are happy with the release and it checks all the boxes and we haven't added a few of the things we want like quickshifter, launch control, blah blah blah, we will likely release without those functions and come back to it later when allowed. Right now we are buried in projects but trying to get through them as quickly as possible.
This is an entirely new ECU, with a new microcontroller inside that has it's own instruction set that vary drastically from say the Renesas SH7052/7055/7058. Those days are gone I'm afraid. So as we learn more about it specifically on this platform or others, we will be able to do more things with it.
I can't (won't) go into too much detail about specifics at this time, simply because of some people out there and we'd like to maintain any competitive advantage we have.
Release Date
We are -super close- to release. We're in the later stages now. I do not have a concrete ETA - as things always do come up in development. I think for the new Z H2 and ZX-10R we thought we had everything in the last bit of testing and it still took a few weeks after that initial point we thought we were okay to go as we were able to generate some off the wall errors that although unlikely to be seen user side, we could recreate repeatedly and pushed it back until we had those resolved.
Best thing I can say is keep your eyes peeled on Facebook or our official website (www.woolichracing.com) for the release. For those who are subscribed to the waitlist, you'll be notified via email when it is ready.
Product Availability
All the product is available in house, at least here in the US. I can't speak for the other distributors in the UK, EU or AU, but we've had it ready for a bit. We have been steadily ordering hardware as available in order to build up some stock levels that we hope will be sufficient when it launches soon. Even though we did that with the Z H2 and ZX-10R, we sold out of everything in a matter of a day or two because demand was that high. Hopefully this won't be the case, but if it is - hardware will be arriving by Kangaroo and Koala weekly so any back orders will be filled in the order they're received.
And no, before anyone asks, I am not doing any pre-orders on hardware. That hasn't worked out well for me in the past because say something is delayed, then you're left with hardware that you can do nothing with. My mom often didn't get batteries for my toys at Christmas, so I know what it's like having a new toy and not be able to do anything with it. Don't want that to happen to you guys as it upsets you, which upsets me because I can't do anything about it to push it out any faster and feel bad about it like I duped you guys or something. So, I'd prefer to just skip all that if possible especially with what I think will be sufficient hardware - unless I've totally underestimated the demand level. In which case, future me says he is sorry and we can usually have new hardware here in under a week
Test bike as delivered a few weeks ago
View attachment 1650806
Anyways, I hope this clears up some things for everyone. I will try to check in here periodically, but we are absolutely bonkers busy right now so our support system is high priority. Thanks guys and gals!
mark3evo
Registered
Moore Mafia says he gets his in 2 to 4 weeks
Fear the power. Respect the power. Control the power. Enjoy the power!.
I can pull my ECU right now !!!
Besides if the wife and I go to the dragon next year, or even Daytona bike week, we could make it a point to stop by and put that on the Dyno.
That's quite a ride from the Dragon Adam
ME-Motorsports
Registered
Hey guys/gals, figured since we had a slew of tickets come in asking "where do I buy now" I figured Chris must've made a post somewhere.
Chris is testing for us - as it's much better to have someone third party go over your work. We can go over it over and over and over and think it's all good, but we've been working on it for a hot minute so it's easy to miss something either in the software or in how it functions. Similar to code reviews in programming or an apprentice in a shop; you always want a second set of eyes on something prior to release.
Hopefully he says all is working well and confirms what we've been seeing/doing behind the scenes here getting this ready.
It's coming... soon. I promise
Chris is testing for us - as it's much better to have someone third party go over your work. We can go over it over and over and over and think it's all good, but we've been working on it for a hot minute so it's easy to miss something either in the software or in how it functions. Similar to code reviews in programming or an apprentice in a shop; you always want a second set of eyes on something prior to release.
Hopefully he says all is working well and confirms what we've been seeing/doing behind the scenes here getting this ready.
It's coming... soon. I promise
ottafish
Registered
Anyone in Au doing testing? Maybe a Suzuki shop in Melb?Hey guys/gals, figured since we had a slew of tickets come in asking "where do I buy now" I figured Chris must've made a post somewhere.
Chris is testing for us - as it's much better to have someone third party go over your work. We can go over it over and over and over and think it's all good, but we've been working on it for a hot minute so it's easy to miss something either in the software or in how it functions. Similar to code reviews in programming or an apprentice in a shop; you always want a second set of eyes on something prior to release.
Hopefully he says all is working well and confirms what we've been seeing/doing behind the scenes here getting this ready.
It's coming... soon. I promise
InfiniteReality
Registered
That's how my instrument/electrical design projects go at work. I can look at my project package and think it's 100% accurate, no typos, all is good. It never is, always something and generally small. We always get another design to check out work and after 20yrs I've come to the conclusion it's impossible to get a project 100% on your own. Even small projects. Like ME said, you look at it so long you accidently will overlook things.
Thanks ME, and congrats!. This confirms just how close you are!
Thank you Thank you Thank YOU !.Hey guys/gals, figured since we had a slew of tickets come in asking "where do I buy now" I figured Chris must've made a post somewhere.
Chris is testing for us - as it's much better to have someone third party go over your work. We can go over it over and over and over and think it's all good, but we've been working on it for a hot minute so it's easy to miss something either in the software or in how it functions. Similar to code reviews in programming or an apprentice in a shop; you always want a second set of eyes on something prior to release.
Hopefully he says all is working well and confirms what we've been seeing/doing behind the scenes here getting this ready.
It's coming... soon. I promise
scotty - 12
Registered
Makes sense to do your diligence. Appreciate the update.Hey guys/gals, figured since we had a slew of tickets come in asking "where do I buy now" I figured Chris must've made a post somewhere.
Chris is testing for us - as it's much better to have someone third party go over your work. We can go over it over and over and over and think it's all good, but we've been working on it for a hot minute so it's easy to miss something either in the software or in how it functions. Similar to code reviews in programming or an apprentice in a shop; you always want a second set of eyes on something prior to release.
Hopefully he says all is working well and confirms what we've been seeing/doing behind the scenes here getting this ready.
It's coming... soon. I promise
Similar threads
