Flashing the 08 / ECU Editing software for GEN II Busas

[PetriK]

watching the vidoes, how do you set all gears to have 5th gear timing

just open the ignition map on version 2.3 or newer and it will do this for you. in previous versions we had 6th gear map but after some dynoing and riding sessions felt that its better to put gear 1-5 map to 6th rather than6th map on gearrs 1-5.

if you want really affect how the bike behaves then have a play on the stp maps. thats where the by gear differences are. i may make an unify stp maps just for simplicity in the future - now each gear has its own stp map.

 

[smithabusa]

Gears 2 and 3 are the oddball ones in the Secondary throttle plate tuning, they open fully much later than gears 1,4,5,6

 

[smithabusa]

 

[busafastone]

so can you set the 2nd and 3rd gear stps the same as the rest

 

[smithabusa]

yes, at the moment manually

 

[busafastone]

I have to mess with it a little just to see if I like it

 

[busafastone]

when you have a tre does it change the stp maps

 

[smithabusa]

yes tre puts ecu into 5th gear all the time

 

[busafastone]

i will have to change just alittle like the stp maps and see if I like it

 

[busafastone]

so can you save one of the othe stp maps for 1456 and reaplly it to 2nd and 3rd

 

[smithabusa]

no at the moment you have to manually do it, like i said about 5 posts up lol

 

[busafastone]

ok I will still mess with it and see what happens

 

[busafastone]

if it is only between 2000 to 8000 maybe adjust just them to the same as higher gear

 

[busafastone]

I still will dyno as soom as I can

 

[illuminati]

Is it possible for you guys to send us some maps??? I have a stock air filter with dapincci exhaust.......

 

[busafastone]

stupid question what is ms0 and ms1

 

[smithabusa]

i have some maps on my site, but to be honest i dont think you are going to gain anything with dapincci exhausts and stock filter.

ms0 is the normal map the ecu is in the stock configuration, there is another fuel / ignition mapped that if repgrammed can be used for alternate fuel, nitrous, etc, that map is ms1

 

[busafastone]

cool now makes sense so since I have just exhaust I will play with the ms0 maps. I am going into b&c mode and changing a little of the stp maps

 

[smithabusa]

changing STP map doesn't change the fueling that needs to go with it, like i have told you about 20 times now better stop messing with things that change afr without being on a dyno, or user beware comes to mind

 

[busafastone]

then without someone to dyno all you can change is the limiter?