What Did You Do To Your Busa, Today?

[busafan08]

What was on it before you swapped?

Yoshimura RS3 stainless steel duel mufflers

 

[GAmedic]

I pulled mine into the garage two weeks ago and it hasn't moved since. Gonna pull it out sometime this week and run it around the block.

 

[WuzzaCBXRider]

Wow, ordered the PR2 front on Tuesday and it was on my porch when I pulled in today. The dealer called and the fork seals also came in, ordered them just two days ago! Not bad. Now just waiting for the pads and rotors.

 

[voodoodoo]

My "new" 2013 got the racing headers from Blackwidowexhaust.uk and a Bazzaz Z-FI . Already have the Akrapovic titanium mufflers.
I will do a dyno tune within the nex month or so to get it properly dialed in. The ecu is flashed and derestricted by the previous owner but the engine rides rough on low rpm and that annoys me bifg time when doing twisties as i have to use the rear brake all the way to the launch out of the bend to keep it smooth...
Haven't dynoed it before but my previous 03 made 176rwhp on the same bench.. looking for 185+ hp and a smooooth engine .

 

[Tached1300]

My "new" 2013 got the racing headers from Blackwidowexhaust.uk and a Bazzaz Z-FI . Already have the Akrapovic titanium mufflers.
I will do a dyno tune within the nex month or so to get it properly dialed in. The ecu is flashed and derestricted by the previous owner but the engine rides rough on low rpm and that annoys me bifg time when doing twisties as i have to use the rear brake all the way to the launch out of the bend to keep it smooth...
Haven't dynoed it before but my previous 03 made 176rwhp on the same bench.. looking for 185+ hp and a smooooth engine .

Got pics of exhaust?

 

[voodoodoo]

Got pics of exhaust?

Not mounted yet, will post some photo's when its all up &running .

 

[PlamenBG]

Heal tech Gipro ATRE G2 Instal Hayabusa

 

[Bumblebee]

Haven't dynoed it before but my previous 03 made 176rwhp on the same bench.. looking for 185+ hp and a smooooth engine .

Should be within that range...might not be smooth at idle, mine is lumpy with the Bazzaz

 

[Bigpopa64]

This is what I did to my busa a few minutes ago got her dyno tuned, at Blais Cycle inc the hayabusa guru's love too know what you guys think

View attachment 1606683

View attachment 1606684

View attachment 1606685

Is 157 rwh good or bad it's an 02 with 30,000
miles ???

 

[WuzzaCBXRider]

Is 157 rwh good or bad it's an 02 with 30,000
miles ???

Stock, sounds ok. My 06 was 160. something, not quite 161 @ around the same mileage.

 

[Bigpopa64]

Stock, sounds ok. My 06 was 160. something, not quite 161 @ around the same mileage.

Ok thanks WuxzaCbxRider was getting alittle worried

 

[busabobh]

I had an 02 , with RS3 full exhaust , and pc tuned only made 158 hp.

 

[ottafish]

Not mounted yet, will post some photo's when its all up &running .

Which one did you buy? 4>2 or 4>1?

I bought their 4>2 race lightweight. Nice piece of kit.

 

[white.Busa]

I pulled the trigger on these new goodies today
my wife is thinking of hiding my credit card

Pro-Bolt Ti Top Yoke Nut Ti Suz GSX1300R Hayabusa 12+ TIYOKEO30 | eBay

Pro-Bolt TI Flanged Nut M25 x 1.50 Rear Wheel Black GSX1300R Hayabusa 08-11 | eBay

clutch line refresh for the next service
Galfer Brakes - FK003D223CL - Sportbike Stainless Steel Hydraulic Clutch Line | eBay

 

[Kiwi Rider]

I pulled the trigger on these new goodies today
my wife is thinking of hiding my credit card

Pro-Bolt Ti Top Yoke Nut Ti Suz GSX1300R Hayabusa 12+ TIYOKEO30 | eBay

View attachment 1606758

Pro-Bolt TI Flanged Nut M25 x 1.50 Rear Wheel Black GSX1300R Hayabusa 08-11 | eBay

View attachment 1606759

clutch line refresh for the next service
Galfer Brakes - FK003D223CL - Sportbike Stainless Steel Hydraulic Clutch Line | eBay

View attachment 1606760

Woah! That Ti axle nut works out to be NZ$89.00 !!!!
Thats a lot of hay for a nut lol.
I really want to grab one of those Galfer clutch hoses.
Mmmmmmm . . no wife to gain permission from . . .
mmmmmmm . . what to do?
Hmmmmmm . . . DONE!! Lmao.

 

[Kiwi Rider]

Gave the old girl a well deserved clean today, too windy to ride today.
Have a look at that chain!
It's done 30,000kms and that's what ya get when you buy top quality (DID ZVMX) and clean and lube it every 500kms.
Oh, and fitted some chrome bar end weights too!

 

[white.Busa]

Woah! That Ti axle nut works out to be NZ$89.00 !!!!
Thats a lot of hay for a nut lol.
I really want to grab one of those Galfer clutch hoses.
Mmmmmmm . . no wife to gain permission from . . .
mmmmmmm . . what to do?
Hmmmmmm . . . DONE!! Lmao.

I agree that there is a lot of money for that
But what's important is, I liked them and bought them
The sure thing is that I'm not going to continue with titanium screws it's definitely not value for money.
The Galfer clutch hosess It is a classic value.

 

[white.Busa]

Gave the old girl a well deserved clean today, too windy to ride today.
Have a look at that chain!
It's done 30,000kms and that's what ya get when you buy top quality (DID ZVMX) and clean and lube it every 500kms.
Oh, and fitted some chrome bar end weights too!

View attachment 1606767

View attachment 1606768

I use the same DID ZVMX chain but I clean it every 2000 kilometers. I don't know how long it will take

 

[c10]

Hey @Kiwi Rider @white.Busa

everything is ti except the axle

 

[Bumblebee]

Hey @Kiwi Rider @white.Busa

everything is ti except the axle

View attachment 1606769

Yes, but you are a carrier of the Ti disease....and it's contagious...very contagious.