Project "phoenix" has come to a halt...

[PACIFICBUSA]

ok...so here's what it looks like. I know, I know....it looks like COMPLETE disarray.

 

[PACIFICBUSA]

you know, that streetfighter look doesn't seem to be too bad. I'm kinda diggin it.

 

[PACIFICBUSA]

'nother shot...

 

[PACIFICBUSA]

ok...now it's on to the good stuff. Here's where the external filter is set up.

 

[PACIFICBUSA]

'nother shot...

 

[PACIFICBUSA]

'nother view. That hose that you see on top of the pump assy is the newer FI line that I installed. It runs from the upper part of the pump housing.

 

[PACIFICBUSA]

moved the T-joint on the fuel rail that was near TB#4. Sits in between TB 1 & 2.

 

[PACIFICBUSA]

shot of the filter. You can see the arrow pointin on the can...so it appears I got the flow right.

 

[PACIFICBUSA]

'nudder shot of the set-up

 

[MN72Busa]

Pac - those are some smokin wheels...very Nice! And you take very good care of your fingernails...obviously a benefit from extended goat's milk use

 

[PACIFICBUSA]

and the up close of the oulet. Right above the new pump hose is where the T-joint used to be.

The filter sits slightly lower than the pump.

 

[PACIFICBUSA]

Pac - those are some smokin wheels...very Nice! And you take very good care of your fingernails...obviously a benefit from extended goat's milk use

heheh...thanks, man! Don't tell no one, but I actually file 'em down after I clip 'em.


Wait a minute. Did I just say that out loud?



The wheels are courtesy of SageRonin and GMbusa. It wouldn't have happened without them.

 

[PACIFICBUSA]

Ok...so what say you, fellow members? Whaddya say?


Eagerly awaiting your input.

 

[BA BUSA]

any luck yet

 

[PACIFICBUSA]

no...none yet, bro. I'm gettin real tempted to remove that external set-up and toss in the old fuel filter. Wanna see if it'll actually idle for me.

I got a newer ECU, injectors, coils and rectifier on the way. Not to mention a pump.

Geez...total cost of the rebuild thus far is $295 shy of what I originally bought the bike for. Dayum!

 

[PACIFICBUSA]

no one? Nada?

 

[goodluck]

i think i would just try to move back my steps from when it was running , try taking the filter off first and go from there, it sounds like this is one of the smallest things that could be done

 

[PACIFICBUSA]

yeah...I was figurin I may go down that route.

 

[hbr]

Sorry bro.....wish I had an idea, but I am rootin my arse off for ya.

Fingers crossed that the external filter is it.

 

[PACIFICBUSA]

thanks, man...

I hope it's just that too. Then mebbe all I'll need to do is replace the external with a freer flowing one.